It fits standard 2 piping making it ideal to upgrade any older mechanical or digital spa pack. Built in programmable features such a filter cycle programming by duration or time of day , various power saving modes including sleep mode, economy mode, standard in economy mode, ozone suppression, clean up cycle, freeze protection, panel lock, temperature lock, standby mode for filter changes and sophisticated diagnosis and reminder measures are just some of the features.It also has the ability to select how much current will be drawn allowing a breaker as low as 30 Amp, yet still deliver the full 5.5 kW of electric heat. It has receptacles for the following. One 2-speed pump 1; one 1-speed pump 2 (which can be filed altered to handle a 2-speed pump); one blower or 3rd Pump 3; one circulation pump; one ozonator; one constant-on for Audio/Visual devices; one 12 volt light or LED or fibre wheel. The light circuit is convertible to 120 VAC. All receptacles can be switched to supply 120 Volts or 230 Volts. EL2000M3 pak with 2 PVC heater tail pieces. Complete instruction manual for retrofit situations produced by Northern Lights.
The Patented M7 Technology removes the need for pressure sensors and remote heat sensors common on other older spa packs. This unique technology allows the spa pack to be positioned in any location or direction (before or after the pump or before or after the filter). 11.25" High x 19.5" Long x 4.60 Deep. Requires Balboa ML series panels and has connectors for 3 main panels and two auxiliary panels. Optional infrared remote control is available.
Optional RF wireless control and monitoring is available (3 types of systems). 120 or 230 VAC ozone support. High or Low current mode.
The flow through heater tube must be a minimum of 23 USGPM if the heater is 5.5kW. This flow rate should be checked if your spa uses a small circulation pump such as those made by Laing, Grundfos or Waterway Mighty-Might.
These small pumps when used with 1 piping typically cannot produce this flow. Can only handle pump 3 or blower, not both. MADE IN AMERICA not China!Pump supplying flow through heater must deliver 23 USGPM or more if heater is in 5.5kW mode. What is the difference between the VS520SZ and the EL2000 M3 spa packs? See the Balbao Spec Sheet. The EL2000 M3 has more control features and has wireless RF control and monitoring capability which the VS series spa packs do not have. Works with the following Balboa Top Side Controllers.
Balboa ML200, Balboa ML240, Balboa ML260, Balboa ML400, Balboa ML550, Balboa Ml 551, Balboa ML553, Balboa ML554, Balboa ML700, Balboa ML900. Balboa Spa Pack Features Comparison.
5.5 Kw Heater 240 VAC. Separate Optional Aux 5.5 Kw Heater.240 VAC or 120 VAC. Separate voltage for ozone & blower. 1-Speed Blower or Pump 3.
Light switchable to 12 volt or 120 VAC. Filter cycle program by time of day. 2,4, 6, 8hrs and continuous.
Clean up cycle (filter & ozone on after use). Only when jets are on. IR Dolphin Remote Control Option (short range). 12 Volt light wiring Kits. Tech Support 1 800 by NLCT.
Note 1 - push button action with 1 speed pump 2 is OFF OFF ON. Note 2 - factory default is pump2 1-speed. Field changeable to support 2-speed pump2 but blower receptacle is then not active. Optional EL2001 Spa wireless controllers. Your #1 Hot Tub Parts Replacement Store!
The item "Balboa EL2000 Hot Tub Heater El2000 Spa Pack PN# 55065-04" is in sale since Monday, February 1, 2016. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs". The seller is "hot-tub-parts" and is located in Winnipeg, Manitoba.This item can be shipped to United States, Canada.