- Home
- Brand
- Aquarest (42)
- Balboa (36)
- Bestway (72)
- Coleman (54)
- Cover Valet (12)
- Evolution Spas (14)
- Gecko (12)
- Goplus (16)
- Happy Hot Tubs (13)
- Intex (147)
- Jacuzzi (41)
- Lay-z-spa (27)
- Lifesmart (24)
- Mspa (13)
- Pacifica Hot Tubs (26)
- Realtree (17)
- Strong Spas (17)
- Symbolic Spas (11)
- Waterway (11)
- Watkins (24)
- ... (998)
- Capacity
- Features
- Model
- Shape
- Type
- Fiberglass (2)
- Hard Shell (4)
- High Flow Heater (6)
- Hot Tub (50)
- Hot Tub Accessories (18)
- Hot Tub Filter (3)
- Inflatable (286)
- Inflatable Hot Tub (2)
- Plug & Play (10)
- Polyethylene (2)
- Portable (2)
- Portable Hot Tub (3)
- Pump, Blower & Light (5)
- Soft Tub (26)
- Spa Surround (2)
- Standard (8)
- Swim Spa (40)
- Through Bolt Design (2)
- Touch Pad (3)
- Wood Tub (48)
- ... (1105)
Hot Spring Control Panel Bezel 1 Pump 71510
The control panel consists of the buttons that spa owner uses to regulate the light and thermostat, as well as operate the jet pump(s). The control panel is attached to the spa by two screws. The control panel has a soft light to illuminate the control head display at night. There are two locking features to the control panel, TEMPERATURE LOCK and SPA LOCK.
Spa Lock deactivates all functions of the control panel and is activated by pushing the LIGHT minus (-) and TEMP minus (-) at the same time and holding them down until the word SPA and the lock symbol are illuminated on the control panel display. Temp Lock deactivates the temperature control function of the spa and is activated by pushing the LIGHT plus (+) and TEMP plus (+) at the same time and holding them down until the words SET TEMP and the lock symbol are illuminated on the control panel display.
Unlock either system by reversing the corresponding process. All spa models have an indicator light on the control panel.
As well as being a power on indicator, the indicator light also serves as the signal light for the diagnostic feature incorporated in the Interlock/Timer circuit board. This light allows the homeowner to visually identify if a problem exists with the spa. Steady light indicates spa is working properly. No light indicates a problem with the power source to the spa.Flashing light indicates an open interlock circuit. Steady light indicates the spa water temperature is within 2 ½ degrees of the set temperature. No light indicates the spa water temperature is outside of the set temperature range.
Flashing light indicates there is a problem with the temperature sensor. Steady light indicates the clean cycle has been activated. No light indicates the clean cycle is not activated.
The light will remain illuminated as long as the clean cycle is operational. 71510 Control Panel Bezel 1 Pump is for the following models. The item "Hot Spring Control Panel Bezel 1 Pump 71510" is in sale since Monday, June 4, 2018.This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs". The seller is "hottubspasupply" and is located in Yonkers, New York. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- MPN: 71510
- Brand: Watkins