To reset this pump simply power down the spa for 30 seconds then power it back up. Note: Some applications may require that this pump lay on its side for an easier connection to existing plumbing. It is not necessary to attach this pump to the floor of the equipment compartment.Technical Specs: 115volts/60hz/35 watts (6,000 Gallons every 24 hours). Disconnect power to the spa. Unplug the circulation pump from the control box. If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers or insert wine bottle corks into the ends of the tubing. Remove the bonding wire and base bracket screws. Use pliers to slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing. Remove the vinyl tubing from the pump inlet and outlet fittings. Disconnect the electrical cord for the old pump.
Take note of the electrical hookup. Installation of the new pump.
Install the original electrical cord onto the new pump. Reverse steps 3 to 7 of the Circulation Pump Removal instructions. Reconnect power to the spa.Perform a water flow test. Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp. Reinstall the equipment compartment door.
On ORDERS of any TWO (2) Items Totaling. Subscribers to our store and receive "Private Subscriber Discounts" news-blasts. Let us know if you need product overseas or across borders. We'll see what we can do (no chemicals sales internationally -- only parts, accessories, miscellaneous)!These are the buyers responsibility. We aim to please our goal is to get you back in hot water, enjoying your spa! The item "Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427" is in sale since Sunday, June 05, 2016.
This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs". The seller is "spaguys247" and is located in Prescott, Arizona. This item can be shipped to United States.