Runs on 20 GPM minimum , 2" or 1-1/2" PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps.This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller, along with all your specs and details. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short'pigtail' cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it's changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v.
On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard.Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2" or 2" PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we'll respond with price and leadtime. So message us if you want 3-wire, please. User's Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16" tall, and 15-3/8" wide, 7" deep, heater is 15" flange to flange.
Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years.
Message us anytime for tech support, questions, or just general help, or we're happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25x7.25" with 57" long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors.Air Blower power cord, a short'pigtail' with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire.
Light pigtail with quick disconnect AMP plug, 18 ga wire. Manual and Programming Guide can be viewed and printed on the ACC-Spas website.Be sure to add me to your favorites list. Check out my other items. The item "Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Keypad ACC 5.5kW new" is in sale since Tuesday, March 19, 2019. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs".
The seller is "warehousethirtythree" and is located in Southern, California. This item can be shipped to United States.