300 Watt-Infrared Sauna Heater (Carbon Fiber) -120 VAC

  
300 Watt-Infrared Sauna Heater (Carbon Fiber). Infrared Carbon Fiber Panel Sauna. 300 Watt x 110-120 VAC. Carbon Fiber panel heaters are the most effective infrared heaters for saunas in the market! These 300-Watt heaters have a much larger surface area which covers 1000 times more body surface than any other style of infrared heater. These heaters emit infrared radiation in the 4-14 micron range. This is the most ideal spectrum as it most closely matches our bodies natural energy absorption. Unlike ceramic tube style IR heaters, the carbon fiber will not burn. The maximum temperature is 190 degrees compared to other heaters that can get glowing red hot (up to 600 degrees).

The lower temperature emits longer waves which are deeper penetrating. The infrared heater emits safe radiation that penetrates up to 1 though the body. Unlike convectional sauna heaters, infrared heaters only heat the body not the air. The end result is you sweat more profusely at a lower temperature. The deep muscle penetrations stimulates cells and is ideal for healing sports injuries, arthritis and other muscle and tissue ailments.

These heaters are made from a special carbon fiber paper that is laminated between two layers of fiberglass. This indestructible sheet is then framed using hand sanded bass wood frame. The dimension of the heaters are 32" x 20" and come with protective wooden heat guards. These are the easiest heaters to install into any new or existing sauna cabin. Simply hang them on the wall in the same way you would a picture frame. Each heater comes with ready to connect wiring. The heaters can be connected to an existing sauna controller or wired directly to a power switch similar to a house light switch. IR heat is more like a light and as such most people choose to use an on/off configuration rather than a temperature controlled switch. You can quickly turn a small space such as a closet into your own infrared sauna! The guide line for selecting the number of heaters is minimum 15 Watts per 1 cubic ft.

For example, a 3' x 4' x 6' space = 72 cubic feet (3x4x6). This area would require 1080 Watts, or 3.6 heaters (always round up) so 4 x 300-Watt heaters would be ideal for this size area. This guideline assumes a heat temperature requirement similar to a traditional Finnish Sauna.

These IR panels are available in both 120 VAC and 240 VAC. However, if the Mercuri controller is to be used the matching 120 volt version of the controller should be selected with the 120 VAC panels.

The item "300 Watt-Infrared Sauna Heater (Carbon Fiber) -120 VAC" is in sale since Thursday, April 9, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs". The seller is "sauna-heaters" and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

• UPC: 608819223445
• Brand: Heaters4Saunas
• MPN: PN-Sauna-IR-300-110