Its the area of your Lay-Z-Spa that is filled with water and connects to the heater pump. It also contains the integrated massage jets that provide a relaxing spa experience. The replacement will be smaller than the original once you have inflated it.
The reason being, this is made from vinyl which expands over time from the ambient air temperature and the heat of the water. Once fully expanded, this will look the same as before. Also included is the leatheroid bottom exterior cover for your Lay-Z-Spa Paris AirJet Hot Tub. The cover fits snugly over the inflatable liner of the Lay-Z-Spa Paris (from the bottom up). It helps to protect the inflatable liner from damage.It also provides insulation to prevent heat escaping. This helps to retain the water temperature inside your spa so that it takes less time to heat up. The leatheroid liner cover has holes to easily connect the heater pump to the spa. The cover features integrated Double Lock Safety Clips to securely attach the leatheroid top cover supplied with the Lay-Z-Spa Paris AirJet Hot Tub. This includes the 2020 addition of the drain pipe that is now attached to the liner to make draining your spa even easier.
SUITABLE FOR NEW YORK LAY Z SPA ALTHOUGH WILL STATE PARIS ON OUTER COVER. This is the part that covers the inflatable top ring.
If your Lay-Z-Spa Paris leatheroid top cover is damaged or just needs a fresh look update, there's no need to splash out on a completely new spa. With clip style fasteners (not velcro style). NOT SUITABLE FOR NEW YORK LAY Z SPA. Ideal replacement for damaged/un-repairable inflatable tops for the Paris and New York Lay Z Spa.Designed to retain heat within the spa. Fits inside the external material top cover. The LED Strip is compatible with the Lay-Z-Spa Paris or New York. It is waterproof and sits on the bottom of the outer cover of the spa facing upwards. Once installed the lights will then shine through the transparent liner and can be controlled by the remote supplied also with this kit! Filter Pump & Heating Unit. This is the part that pumps and heats the water (AirJet model). Heating and blowing air at the same time. Heats up to 40°C (104°F). For outdoor or indoor use. Easy set-up in 10 minutes, no professional installation required. Digital control for massage jets, water filtration and rapid heating. Filter & Heating Unit Specifications: Voltage: 220-240V50Hz, 2050W at 20°C, Class II Actual Water Flow: 1,325L/h (350 Gal/h) Rapid Heating System: Approx. This Lay-Z-Spa heater pump is compatible with all Airjet models NOT HydroJet models. This Filter Housing screws directly inside your Lay-Z-Spa inflatable liner which helps improve your Bestway Lay-Z-Spa's water circulation and filtration efficiency. Please note they will not fit the older style Bestway Lay-Z-Spas where you put the filter into your heater. The Lay-Z-Spa Spare Parts Set features a ChemConnect, Hose Adapter, Inflation Hose, Screw Valve and Cover Adapter. The perfect starter kit for new hot tub users. Includes 500g pH Plus & 700g pH Minus.
Includes 500ml Foam Remover & 25 Dip Test Strips. This Clearwater Spa Chemical Starter Kit (CH0018) is a fantastic option for a new inflatable hot tub user as it includes a variety of products to help protect and maintain your spa as well as a useful guide for safe and effective water treatment.
Chemical water treatment for your Lay-Z-Spa is essential regardless of how long or how often you plan to use the hot tub for. The kit includes 500g Chlorine Granules for disinfecting pools & spas, 500g PH Plus for increasing PH of pool & spa water, 700g PH Minus for decreasing PH of pool & spa water, 500ml.
Official Air Pad Protector to maintain water temperature. Sometimes known as a'Boston Valve' this two-way inflation Bestway Screw Valve for use with the Lay-Z-Spa Vegas.
It screws in to fit a 2cm diameter hole. May receive Black or White. Desired colour can't be selected. Please Note: We recommend you measure the hole prior to ordering to make sure it is the correct size and part.Compatible with Lay-Z-Spa Air Jet Spas. Not compatible with Lay-Z-Spa Palm Springs Hydro Jet. Please check nozzle of the hose to make sure it is the right one for your air valve. Suitable for Paris and New York.
Can be used with any Lay-Z-Spa pump. These 4 filter cartridges are a must have to keep your Lay-Z-Spa in perfect working condition. Simply attach to your spa and it will filter out dirt and grime from the water to help keep it clean and healthy. They also prevent this dirt from getting into the pump and heater which could cause damage and reduce its lifespan.These filter cartridges work by catching dirt and grime when the water is pumped through them. As your pump will usually be continuously cleaning and filtering the water when it is turned on, this dirt can quickly build up, especially when the hot tub is regularly used. Enables you to deflate your Lay-Z-Spa via the heater pumpJoint connects to pump via inflation hose supplied with spa. Can only be attached to spas that have a massage seam. Suitable for every Lay-Z-Spa except Palm Springs HydroJet 54171 - Lay-Z-Spa Havana Airjet. This Deflation T-joint allows you to deflate your inflatable Lay-Z-Spa liner by connecting a pump. The deflation attachment allows you to connect a Lay-Z-Spa heater pump to the liner via an inflation hose. The Deflation T-Joint can only be attached to spas that have a massage seam and isn't compatible with the Lay-Z-Spa Palm Springs HydroJet (BW54144). Rather than letting water pour out and flood your lawn, using a Lay-Z-Spa drain adaptor enables you to direct it to a suitable drainage point. Simply attach a garden hose to the valve to easily change or empty water. Whilst your existing valve may not lost or broken, it is always worthwhile keeping a few handy just in case. Not compatible with Lay-Z-Spa Palm Springs. Compatible with: Miami Airjet Vegas Airjet Saint Tropez Airjet Paris Airjet St Moritz Airjet Monaco Airjet Helsinki Airjet Havana Airjet New York Airjet Honolulu Airjet Bali Airjet. Control Air Lid Adaptor A (Including O-Ring) Port D cap for A pipe. A replacement for the air lid adaptor used on all Lay-Z-Spa models. Whenever you disconnect the spa pump for cleaning or maintenance, you should screw the air lid adaptor onto the air hole (A) on the liner. This helps to protect the pipe when the pump is removed. Keeping your Lay-Z-Spas water pristine is easy with the integrated ChemConnect dispenser. Fully adjustable to determine chemical release, simply add multifunction chlorine tablets for easy, no fuss hot tub chemical care. Please note: The Chem Connect dispenser will only fit 2019 and onwards models of Lay-Z-Spa. THIS LISTING IS FOR PARTS ONLY - NOT THE COMPLETE SPA. The item "Lay Z Spa Paris / New York Airjet Hot Tub Spa Replacement Parts Lazy Layzee" is in sale since Thursday, February 21, 2019. This item is in the category "Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs". The seller is "tfs-direct" and is located in Rochford. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Dominican republic, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.